Heavyequipmentforums - heavyequipmentforums.com - Heavy Equipment Forums
General Information:
Latest News:
New Holland C175 Drive Motor Oil? 27 Aug 2013 | 06:17 pm
Does anyone know what oil goes into the end case of this drive motor?
1974 CAT 988A - Front right brake sticking 27 Aug 2013 | 05:47 pm
Good morning, The front right brake is sticking/rubbing on our 1974 988A. We have removed the wheel, changed the liners, swapped "baloons", check retaining springs.... etc.... We tested the baloons ...
Komatsu pc200-8 27 Aug 2013 | 03:21 pm
Hi guys, We are about to reseal 2 final drives that are showing high quantities of dirt and debis in routine sampling, was wondering if anyone has a procedure to adjusting bearings in final drive whe...
Off Highway truck "engine economy mode" 27 Aug 2013 | 12:00 pm
Hi Guys, Many of the new trucks (777F) have an "engine economy mode" which can be chosen as a "change parameter" on the ecm. We run a fleet of 785C APX trucks and I was reading on the internet an Aus...
650 komatsu running filters dry 27 Aug 2013 | 11:07 am
I am working on a 650 komatsu, we had a batch of bad fuel delivered few weeks ago. Emulsified water!!! Drained the tank on the 650 and put 30-40 gallons of good fuel in it and drained it again! It did...
Learned a new Mini-Ex skill the other day... 27 Aug 2013 | 09:40 am
We are working a job burying trees and debris from an old shelterbelt. We are running a PC 160 and a PC 45 (my chariot). The big excavator digs the holes and moves the big stuff then I come in and mop...
The Great Gradall Project 27 Aug 2013 | 09:35 am
Well, I bought that Gradall and figured I would start a thread with pictures of my restoration attempts. As I've said before, heavy equipment maintenance is new to me, so know-it-all comments are actu...
Case W24C Brakes 27 Aug 2013 | 08:48 am
Im working on a W24C, finally got the 5.9 Cummins bolted up and about to work on the brakes, do I use Hydraulic oil or brake fluid?
CID skid steer brush cutter review 27 Aug 2013 | 08:44 am
after looking for over a year at many models and brands, i settled on a CID extreme 72" brush cutter. this is the model with the 100hp gearbox, and three blade carrier. i received it in about three da...
Bobcat 331/440 question 27 Aug 2013 | 08:29 am
Dose anyone know how much these can pull like hook up to and go forward i plan on renting to pull some old combines out of the woods it would 4000 lbs deadweight drag and then i wanted to break them u...
